A TECO PONIC solution for RDWC systems, reservoirs, vertical farms and indoor growing
In hydroponic systems, maintaining the correct water or nutrient solution temperature helps make the entire setup more stable and easier to manage over time.
Every system, however, has different requirements. Established installations, reservoirs, RDWC systems, indoor farms, seasonal setups, vertical farms and experimental configurations may all evolve during operation.
The new TECO Drop-in range has been developed for these hydroponic applications: a plug-and-play cooling solution designed to provide temperature control exactly where it is needed, without modifying the existing system or adding a dedicated pump for the chiller.
Easier cooling integration
Drop-in uses a titanium heat exchanger that is placed directly in the water, inside the reservoir or the system that needs to be cooled.
This configuration eliminates the need for complex plumbing connections and makes it possible to add cooling to systems that are already operating, where changing pipes, connections or layouts may require time and impractical modifications.
The heat exchanger must always remain completely submerged and be positioned in an area with adequate water movement to ensure effective heat exchange.
The benefits of Drop-in for hydroponics
In hydroponics, easy installation is not only a technical advantage. It also improves day-to-day operations.
Drop-in is useful when you need to:
- add cooling to an established hydroponic system
- avoid installing an additional pump dedicated to the chiller
- reduce modifications to pipes and system structures
- move the cooling solution between different tanks or configurations
- work with temporary, seasonal or experimental setups
- provide rapid cooling support in an emergency or as a backup
- maintain greater flexibility when managing systems that change over time
Minimal maintenance and a plug-and-play configuration make Drop-in a practical solution for growers looking for effective water temperature control without adding unnecessary complexity to their system.
Where can TECO Drop-in be used?
The TECO PONIC application of Drop-in is suitable for a wide range of soilless growing environments.
It can be used in:
- RDWC systems
- water and nutrient solution reservoirs
- indoor growing systems
- vertical farms
- soilless cultivation systems
- established hydroponic installations
- DIY systems
- experimental setups
- seasonal or temporary greenhouse installations
- backup systems
- emergency configurations
In all these applications, the key advantage is the ability to bring cooling directly to the point where it is needed, using a compact, reliable solution that is easy to install and reconfigure.
Three models for different system requirements
The new TECO Drop-in range is available in three models:
- DI 500, for systems up to 500 liters*
- DI 1000, for systems up to 1,000 liters*
- DI 2000, for systems up to 2,000 liters*
* Water temperature: 25°C; ambient temperature: 30°C; heat load: 0.2 W/L.
The right model depends on the water volume and the actual operating conditions of the system, including ambient temperature, heat load, tank position, airflow, lighting and the required level of cooling.
TECO refrigeration expertise applied to hydroponic growing
With Drop-in, we are bringing TECO’s refrigeration expertise to the TECO PONIC world through a solution designed for dynamic systems, different configurations and real operational requirements.
For us, innovation means developing solutions that fit naturally into everyday work: easy to install, practical to manage and designed to maintain the correct temperature without adding complexity where it is not needed.
Frequently asked questions about TECO Drop-in for hydroponics
Can TECO Drop-in be used in a hydroponic system?
Yes. Drop-in can be used in hydroponic applications including RDWC systems, reservoirs, indoor growing facilities, vertical farms, experimental installations and temporary setups.
Does it require an additional pump dedicated to the chiller?
No. The heat exchanger is immersed directly in the water, so no additional pump is required to circulate water through the chiller.
Where should the heat exchanger be positioned?
The heat exchanger should be placed inside the reservoir or at the point in the system where temperature control is required. It must remain completely submerged and be positioned in an area with adequate water movement.
Is Drop-in suitable for established hydroponic systems?
Yes. It is also suitable for systems that are already operating, as cooling can be added without modifying the existing structure.
Can Drop-in be moved between different systems?
Yes. Its plug-and-play configuration makes it suitable for reconfigurable installations, experimental setups, temporary growing systems and backup applications.
Which models are available?
The range is available in three models: DI 500, DI 1000 and DI 2000.
